logo
Agriculture

    15.08.2013 JCB 434S Agri FarmMaster will work on the farm only

    No more building sites!

    JCB concern hurries up to please the large farmers by the latest release of the 434S Agri FarmMaster wheel loader. This is a representative of the heavy class that focuses exclusively on the usage in agriculture.

    4.2-ton truck is powered by a 6.7-liter 6-cylinder Cummins QSB, which produces 230 hp of power and 945 Nm of torque. Engine is equipped with exhaust catalysis and diesel particulate filter. Due to this the adequate toxicity Stage 3B is achieved. The engine speed is automatically reduced by ECO system to 1800 rpm while doing light tasks. After 30 seconds of inactivity the same system reduces them to 700 rpm.

    750/65R26 Michelin MegaXBib tires along with blocking differential on the front axle of the loader provide sufficient maneuverability on the terrain.

    Motor is connected to a 6-speed transmission with automatic shifting. When full speed of the engine is required, the Powerinch system separates the clutch disc from the drive plate of crankshaft. However, the system is activated only at low travel speeds. By the way, the maximum speed of the loader is 48 km/h. Thus, 434S Agri FarmMaster can be a full participant in road traffic.

    The noise level in the cab at work does not exceed 70 dB. For operator’s convenience there were set climate control, air conditioning, ventilation and Actimo XXL seat in the cabin.


    Goto chapter Agriculture

    Home